WallPod : EV Charging Unit | 3 Pin Socket | 13 Amp | IP65 | UK |
- The Entry Level EV Charger ideal for home builders wishing to offer low-cost EV Charging to satisfy planning applications and requirements
- Fully prepared for future upgrade to full mode 3 fast charging using a One Stop upgrade kit
- Can be used as an EV charger or a 13amp outdoor maintenance socket
- Includes built-in overload/fault current protection
- Includes an IP65 outdoor 13amp socket
- Charges almost all current EVs at mode 2
- Ideal for charging electric bikes, scooters, mobility vehicles, golf buggies if required
- Safe and secure AC indoor and outdoor charging
- Warm white base unit (other colours available upon request)
- Green service pods (other colours available upon request)
- Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
- Glow wire rating tested to IEC60695-2-13
- BSI certificated to BS EN 60335-1 for safe use in the home
- Manufactured in compliance with BS7671 wiring regulations
- Compliant with IET EV regulations
- Corrosion resistant
- UV stabilised
- BS EN 60529 : IP65 category 1 certification (weatherproof)
- Operating temperature -30C to + 50C
- Easy to install / low maintenance
- Designed to be permanently located indoors or outdoors
- Able to charge almost all types of electric pushbikes, scooters, mopeds, and mobility vehicles and mode 2 compatible Electric vehicles
- A 13amp socket protected by an IP65 rated access door (locking option available)
- 13amp domestic socket will fully charge an electric bike or mobility vehicle
- Doubles as a home outdoor maintenance socket
- A built-in 16amp 30mA RCBO accessible via an IP65 rated access door (locking option available)
- Full overload and fault current protection
- 230V AC / 50Hz
- Cable entry points top, bottom and back
Option to be easily upgraded to Mode 3 fast charging using a One Stop upgrade kit
Upgrade Kit From EV Ready WallPod EVWP0020 to Type 1 tethered WallPod EVWP1140 16Amp/32Amp
Upgrade you EV Ready WallPod to a Type 1 Tethered Unit Bundle includes: KEM0983D - WallPod Mode 3 Cable Bracket CAB0006 - Black Cable Gland with Spiral Support 25mm ACSE0060...
Upgrade Kit From EV Ready WallPod EVWP0020 to Type 2 tethered WallPod EVWP2140 16Amp/32Amp
Upgrade you EV Ready WallPod to a Type 2 32 Amp Tethered Unit Bundle includes: BUL1049A - WALLPOD POLYPROP PLATES 6MM HEAVY LEATHER KEM0983d - WALLPOD MODE 3 CABLE BRACKET...
EV Home charging cable | Type 1 to 3 Pin plug | 10 Amp | 5/10 Metre | Mode 2 |
Easily charge your EV from a domestic 3 pin socket at 10 Amps (2.2kW). Just plug and charge! This is suitable for all UK households. Specifications UK BS 1363 power...
EV Home Charging Cable | Type 2 to 3 Pin plug | 10 Amp | 5/10 Metre | Mode 2 |
Easily charge your Type 2 EV from a domestic 3 pin socket at 10 Amps (2.2kW). Just plug and charge! This is suitable for all UK households. Specifications UK BS 1363...
WallPodEV: Angle Iron Mounting Post
Galvanised Steel Angle Iron Mounting Post Low cost, heavy-duty post 1500mm x 3mm angle iron Hot-dip galvanised Installation 1000mm above ground, 500mm below ground Four fixing points for WallPod The...
WallPodEV: Box Section Mounting Post
Galvanised Steel Powder Coated Box Section Mounting Post Heavy-duty, galvanised steel powder coated box section WallPod mounting post Surface mount 1200mm above ground Discrete internally run cabling Four fixing points...
EV Standard aluminium EV A3 landscape parking sign
Material - Aluminium Finish - Screen printed
EV Standard aluminium EV A4 landscape parking sign
Material Aluminium Finish Screen printed