NEED HELP? CALL 01205 725 867 MON-FRI 8:30-4:30PM | FREE DELIVERY ON ALL UK ORDERS OVER £100
NEED HELP? CALL 01205 725 867 MON-FRI 8:30-4:30PM | FREE DELIVERY ON ALL UK ORDERS OVER £100
EVWP3010G/17TH
£310.00
The WALLPOD:EV facelift is a low-cost, entry level charging unit, designed to offer full Mode 3 fast charging to every Electric Vehicle (EV/PHEV) on the market today. This charging unit has been specifically designed for domestic and commercial locations including offices, factories, restaurants, hotels, sports venues, etc.
• Mode 3 (IEC 61851-1) fast charging
• Universal charging socket
• 3.6kW (16A) & 7.2kW (32A) charging speeds
• Built-in LED charging status indicator halo
• Certificated by the BSI as safe to use in the domestic environment
• Easy to install and maintain
• Wall or post mounted
• IP Rated
• UV stabilised
• Corrosion resistant
• Fire retardant
• IK10 impact resistant design
Charging Socket - Type 2 (IEC 62196)
AC Charging Output - 3.6kW (16A) 7.2kW (32A)
Charge Protocol - Mode 3
AC Overload & Fault Protection - A dedicated 30mA Type A RCBO or equivalent
protection is required at source (see drop down)
Input Supply - 16A 230V AC/50Hz (Single Phase) / 32A 230V AC/50Hz (Single Phase)
Cable Terminals - 3x 16mm
Standby Consumption - <2W
EV Charging Compliance – EN 61851-1:2019, EN 61851-22:2002
Wiring Regulations – BS 7671:2018
EMC Compliance – EN 61000-6-3:2007+A1:2011, EN 61000-6-2:2005
Safety Compliance (LVD) – EN 62368-1:2014, 2014/35/EU
Environmental Protection – Enclosure IP65, Socket IP54 (BS EN 60529:1992+A2:2013), Enclosure IK10 (EN 60068-2-75:2014)
Contactor – IEC 60947-4-1:2018, IEC 61095:2009
RoHS – 2011/65/EU
REACH – 1907/2006
Dimensions 179mm x 367mm x 142mm (W x H x D)
Unit Material Polycarbonate (303 EP-22)
Operating Temperature -30°C to +50°C
£86.31 £94.95
Our charging cables are of the highest quality and standard.
They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lead.
-16/32 Amp single phase at 3.6/7.2 kW
-Type 1 (SAEJ1772) to Type 2 (IEC62196 / Mennekes)
-5/10 metre long Lightweight and ultra-flexible easy to store and transport.
-Long lasting and reliable
-IEC certified
-TUV certified
-CE compliant
-IP44 rated
-J1772 plug complete with padlock facility (padlock available in options)
-Operating voltage 240VAC
-Tested to 2,500 VDC
-Operating temperature range -30C to +60C
-Hard-wearing, polybutylene terephthalate (PBT) handle
-Copper alloy contacts
This cable comes with Type 2 and Type 1 connectors. The Type 2 must be connected to the charge point socket and Type 1 to your car.
This cable is suitable for the following vehicles:
FREE UK DELIVERY: (Orders over £100.00 + Vat),
A free Next working day delivery service is available to UK customers, Some exclusions apply for next day delivery. Order’s under £100.00 + vat is £8.50. Orders placed before 1 pm will arrive next working day, if orders are placed after 1 pm these orders will be sent next working day and arrive the following day (excludes weekends). We are however committed to always providing the shortest lead-time possible.
*on occasion orders may take more than the standard 24hours, due to all products being bespoke manufactured upon order, therefor quantity and an increase of daily orders may affect these times scale.
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.
£93.95
Our charging cables are of the highest quality and standard.
They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lead.
-16/32 Amp single phase at 3.6/7.2 kW
-Type 2 to Type 2 (IEC62196 / Mennekes)
-5/10 meter long Lightweight and ultra-flexible easy to store and transport.
-Long lasting and reliable
-IEC certified
-TUV certified
-CE compliant
-IP44 rated
-Operating voltage 240VAC
-Tested to 2,500 VDC
-Operating temperature range -30C to +60C
-Hard wearing, polybutylene terephthalate (PBT) handle
-Copper alloy contacts
This cable comes with Type 2 connectors.
This cable is suitable for the following vehicles:
FREE UK DELIVERY: (Orders over £100.00 + Vat),
A free Next working day delivery service is available to UK customers, Some exclusions apply for next day delivery. Order’s under £100.00 + vat is £8.50. Orders placed before 1 pm will arrive next working day, if orders are placed after 1 pm these orders will be sent next working day and arrive the following day (excludes weekends). We are however committed to always providing the shortest lead-time possible.
*on occasion orders may take more than the standard 24hours, due to all products being bespoke manufactured upon order, therefor quantity and an increase of daily orders may affect these times scale.
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.
£100.00
Galvanised Steel Powder Coated Box Section Mounting Post Heavy-duty, galvanised steel powder coated box section WallPod mounting post Surface mount 1200mm above ground Discrete internally run cabling Four fixing points...
£16.40
Galvanised Steel Angle Iron Mounting Post Low cost, heavy-duty post 1500mm x 3mm angle iron Hot-dip galvanised Installation 1000mm above ground, 500mm below ground Four fixing points for WallPod The...
£90.00
Material - Aluminium Finish - Screen printed
£27.30 £30.00
Material Aluminium Finish Screen printed
£26.87 £27.00
Material Aluminium Finish Screen printed
Europes largest dedicated supplier of electric vehicle cables, charging points and accessories.
Sign up to get the latest on sales, new releases and more…
Call us on:
01205 725 867
or email us on:
sales@evonestop.co.uk
Company Number 09374556
© 2022 EV OneStop. OneStop Europe Limited Powered by Shopify