NEW - 2022 Rolec Type 2 Tethered WallPod | 3.6kW/7.2kW | 5M

Description

The WALLPOD:EV facelift is a low-cost, entry level charging unit, designed to offer full Mode 3 fast charging to every Electric Vehicle (EV/PHEV) with a type 2 connector. This charging unit has been specifically designed for domestic and commercial locations including offices, factories, restaurants, hotels, sports venues, etc. This type 2 tethered lead charging unit offers either 3.6kW or 7.2kW mode 3 charging speeds.

Product Features

• Mode 3 (IEC 61851-1) fast charging
• 5 Metre Type 2 (IEC 62196) tethered lead & lead holder
• 3.6kW (16A) & 7.2kW (32A) charging speeds
• Built-in LED charging status indicator halo
• Certificated by the BSI as safe to use in the domestic environment
• Easy to install and maintain
• Wall or post mounted
• IP Rated
• UV stabilised
• Corrosion resistant
• Fire retardant
• IK10 impact resistant design

Specifications

Charging Gun - Type 2 (IEC 62196)
Charging Cable Length - 5m (approx. 4.5m external)
AC Charging Output - 3.6kW (16A) 7.2kW (32A)
Charge Protocol - Mode 3
AC Overload & Fault Protection - A dedicated 30mA Type A RCBO or equivalent
protection is required at source (see dropdown)
Input Supply - 16A 230V AC/50Hz (Single Phase) / 32A 230V AC/50Hz (Single Phase)
Cable Terminals - 3x 16mm
Standby Consumption - <2.5W

Certifications & Compliances

EV Charging Compliance – EN 61851-1:2019, EN 61851-22:2002
Wiring Regulations – BS 7671:2018 EMC Compliance – EN 61000-6-3:2007+A1:2011, EN 61000-6-2:2005
Safety Compliance (LVD) – EN 62368-1:2014, 2014/35/EU
Environmental Protection – Enclosure IP65, Enclosure IK10 (EN 60068-2-75:2014)
Contactor – IEC 60947-4-1:2018, IEC 61095:2009
Cables – BS 6004:2012+A1:2020
RoHS – 2011/65/EU
REACH – 1907/2006
Dimensions 179mm x 415.5mm x 142mm (W x H x D)
Unit Material Polycarbonate (303 EP-22)
Operating Temperature -30°C to +50°C

-Data Sheet