A simple, low cost, Wall Mounted Mode 3 home charger ideal for charging Type 2 European cars such as BMW , Volvo, Mercedes and Renault from home.
IEC62196 (Type 2) charging plug attached to a 5meter long tethered lead
Cable management as standard remote socket holster as an option
Easy to install and maintain
ZE Ready 1.2 Tested and Nissan Accredited
Believed to be the lowest priced full mode 3 fast charger in the UK
OLEV approved / Grant eligible
IP65 weatherproof (believed to be the highest weather rated HomeCharger available
Built-in overload and DC sensitive fault current protection
Warm white base unit (other colours available upon request)
Green service pods (other colours available upon request)
Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
Glow wire rating tested to IEC60695-2-13
BSI certificated to BS EN 60335-1 for safe use in the home
Manufactured in compliance with BS7671 wiring regulations
Compliant with IET EV regulations
BS EN 60529 : IP65 category 1 certification (weatherproof)
Operating temperature 30C to + 50C
Easy to install / low maintenance
Designed to be permanently located indoors or outdoors
Available in both 16amp (3.6kW) or 32amp (7.2kW)
Mode 3 IEC61851-1 compliant communication protocol
Built-in LED charging status indicator
A built-in 20amp or 40amp RCBO accessible via an IP65 rated access door
Full overload and DC sensitive fault current protection
230V AC / 50Hz
Multiple supply cable entry points
Optional wall mountable remote charging gun holster
Optional facility to lock RCBO access door
Optional addition of a 13amp outdoor maintenance socket (see Multi-mode)
Optional built-in Class 1 kWh mid approved meter (to monitor electricity usage)
Optional built-in time clock for charging during cheap tariff (see economy boost)
Optional emergency charge facility (time clock option)
Optional security key switch control ( to lock off the unit)
All options available in the drop down tabs
EVWP2080 - 16 Amp (3.6kW)
EVWP2140 - 32 Amp (7.2kW)
Platinum Package includes : 1 x 5meter 16amp (3.6kw) Type 2 to Type 2 charging cable + 1 x cable tidy carry case Specifications 16 Amp single phase at 3.6...
Platinum Package includes : 1 x 5meter 32amp (7.2kw) Type 2 to Type 2 charging cable + 1 x cable tidy carry case Specifications 32 Amp single phase at 7.2...
Easily change your Type 2 cable connectors to Type 1 at 32 Amps. A fast and cheap way to reuse your old cables if you change car.
Galvanised Steel Angle Iron Mounting Post Low cost, heavy-duty post 1500mm x 3mm angle iron Hot-dip galvanised Installation 1000mm above ground, 500mm below ground (please choose mounting option from the...
Galvanised Steel Powder Coated Box Section Mounting Post Heavy-duty, galvanised steel powder coated box section WallPod mounting post Surface mount 1200mm above ground Discrete internally run cabling Four fixing points...
3mm Powder coated steel WallPod mounting plate UV stabilised screen printed front 4 x Counter sunk WallPod to plate mounting holes 4 x Plate to Wall mounting holes Plate measurement...
Material - Aluminium Finish - Screen printed
Material Aluminium Finish Screen printed