WallPod : EV Multi-Mode | Type 1 Tethered | 4.5 Meter | 16/32 Amp(3.6/7.2kW) | 3 Pin Socket | IP65 |

WallPod EV: Multi-Mode is a simple, low-cost, easy to install charging unit offering both, 16amp or available 32amp type 1 or type 2 Mode 3 charging as well as an IP65 rated 13amp socket, suitable for both Mode 2 overnight charging and home maintenance use.

• A simple, cost effective Mode 3, 16amp or available 32amp charger specifically designed for charging electric vehicles at home
• available with J1772 (type 1) or IEC62196 (type 2) charging plugs attached to 4.5 meter tethered leads.
• Cable management system and remote socket holster comes as standard
• Includes IP65 rated 13amp socket, suitable for both Mode 2overnight charging and home maintenance use.
• wall mountable remote secure charging gun holster comes as standard
• Easy to install and maintain
• ZE Ready 1.2 Tested and Nissan Accredited
• IP65 weatherproof (believed to be the highest weather rated HomeCharger available
• CE Certified
• BSI Certificated
• Corrosion resistant
• UV stabilised
• Incredibly hard-wearing
• Built-in overload and DC sensitive fault current protection

Specifications

• Warm white base unit (other colours available upon request or on the WallPod Customizer)
• Green service pods (other colours available upon request or on the WallPod Customizer)
• Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
• Glow wire rating tested to IEC60695-2-13
• BSI certificated to BS EN 60335-1 for safe use in the home
• Manufactured in compliance with BS7671 wiring regulations
• Compliant with IET EV regulations
• Corrosion resistant
• UV stabilised
• BS EN 60529 : IP65 category 1 certification (weatherproof)
• Operating temperature 30C to + 50C

Performance

• Easy to install / low maintenance
• Designed to be permanently located indoors or outdoors
• Available in both 16amp (3.6kW) or 32amp (7.2kW)
• Mode 3 IEC61851-1 compliant communication protocol
• Built-in LED charging status indicator
• A built-in 20amp or 40amp RCBO accessible via an IP65 rated access door
• Full overload and DC sensitive fault current protection
• 230V AC / 50Hz
• Multiple supply cable entry points

Options

• Optional facility to lock RCBO access door and 13amp socket pod
• Optional security key switch control ( to lock off the unit)

Includes

• Remote socket holster EVRS0010 FREE!

-Data Sheet PDF

ÍâÍ_