WallPod : EV 3 phase type 2 socket 4pole Mcb & Rcd
WallPod EV: Commercial Charge is a simple, low-cost, easy to install mode 3 fast-charge EV charging station offering either 16amp single or 3 phase (type 2) IEC62196 sockets complete with hatch lock. Designed specifically for charging all Mode 3 electric vehicles in commercial locations such as offices, factories, restaurants, hotels, sport venues, etc for staff, customers or fleets.
Mcb & Rcd fault current & overload protection to be installed at source
Warm white base unit (other colours available upon request or on the WallPod Customizer)
Green service pods (other colours available upon request or on the WallPodCustomizer)
Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
Glow wire rating tested to IEC60695-2-13
BSI certificated to BS EN 60335-1 for safe use in the home
Manufactured in compliance with BS7671 wiring regulations
Compliant with IET EV regulations
BS EN 60529 : IP65 category 1 certification (weatherproof)
Operating temperature -30C to + 50C
Easy to install / low maintenance
Designed to be permanently located indoors or outdoors
Available in 16amp (3.6kW) or 32amp (7.2kW) 16amp 3phase (11kW) or 32amp 3phase (22kW)
Mode 3 IEC61851-1 compliant communication protocol
Built-in LED charging status indicator
20amp or 40amp Mcb fault current protection to be installed at source
Rcd fault current protection to be installed at source
400V AC / 50Hz
Multiple supply cable entry points
EVWP2036 & EVWP2046 is delivered assembled including a 3pole isolator but with no Mcb & Rcd fault current & overload protection
EVWP2056 & EVWP2066 is delivered with no isolator but comes with a separate Mcb & Rcd fault current & overload protection to be installed at source.
Optional security key switch control (to lock of the unit)
All options available in drop down tabs
WallPodEV: Angle Iron Mounting Post
Galvanised Steel Angle Iron Mounting Post Low cost, heavy-duty post 1500mm x 3mm angle iron Hot-dip galvanised Installation 1000mm above ground, 500mm below ground Four fixing points for WallPod The...
WallPodEV: Box Section Mounting Post
Galvanised Steel Powder Coated Box Section Mounting Post Heavy-duty, galvanised steel powder coated box section WallPod mounting post Surface mount 1200mm above ground Discrete internally run cabling Four fixing points...
Hatch Lock for IEC62196 Type 2 Socket EVHL0045
Hatch Lock for IEC62196 Type 2 Socket Product Code EVHL0045
The keyswitch allows you to lock your charging unit with an ON/OFF switch. This is the perfect solution for units in exposed areas to give you the control on who...