NEW - 2022 Rolec HomeSmart | 3.6kW/7.2kW | Built-in TruePEN PME Fault Detection & DC Device | Supplied with a CT clamp for Load Balancing | GPRS | App Controlled

EVHS4010G

£511.50

Description

The WALLPOD:EV HOMESMART facelift has been designed to provide an easy charging experience for EV drivers, allowing them to recharge their vehicle using their smartphone. EV drivers can completely control their charging behaviour using their smartphone, whilst also having the ability to monitor their consumption data.

The WALLPOD:EV HOMESMART is complete with built-in TruePEN PME fault detection, eliminating the requirement for earth electrode/rods. This charging unit is also integrated with dynamic electrical load balancing which adjusts the rate of charge to prevent overloading the home’s electrical supply.

Product Features

• Smart charging (see smart features)
• Mode 3 (IEC 61851-1) fast charging
• Universal charging socket
• 3.6kW (16A) & 7.2kW (32A) charging speeds
• Built-in TruePEN PME fault detection, no earth electrode/rod required
• Dynamic load balancing – automatically protects the house fuse (Locally configurable to suit house supply, CT clamp & 5m cable included)
• Built-in DC sensitive protective device
• Built-in LED charging status indicator halo
• Built-in Class 1 MID compliant kWh meter
• Built-in Modem and roaming sim
• Built-in GPRS communication antenna
• IP Rated & UV Stabilised
• Corrosion resistant, fire retardant & IK10 impact resistant design

Specifications

Product Code - EVHS4010G EVHS4020G
Charging Socket - Type 2 (IEC 62196)
AC Charging Output - 3.6kW (16A) 7.2kW (32A)
Charge Protocol - Mode 3
AC Overload & Fault Protection - A dedicated 30mA Type A RCBO or equivalent protection is required at source (see options below)
DC Fault Protection - Built-in 6mA DC Sensitive Device
Earthing - Built-in TruePEN PME Fault Detection
Input Supply - 16A 230V AC/50Hz (Single Phase) / 32A 230V AC/50Hz (Single Phase)
Cable Terminals - 3x 16mm
Communications GPRS (Recommended signal strength of 14 CSQ or above)
Standby Consumption - <5W

Certifications & Compliances

EV Charging Compliance – EN 61851-1:2019, EN 61851-22:2002
Wiring Regulations – BS 7671:2018
EMC Compliance – EN 61000-6-3:2007+A1:2011, EN 61000-6-2:2005
Safety Compliance (LVD) – EN 62368-1:2014, 2014/35/EU
Communications – 2014/53/EU
Environmental Protection – Enclosure IP65,
Socket IP54 (BS EN 60529:1992+A2:2013), Enclosure IK10 (EN 60068-2-75:2014)
Contactor – IEC 60947-4-1:2018, IEC 61095:2009
Metering – 2014/32/EU
RoHS – 2011/65/EU
REACH – 1907/2006
Dimensions - 179mm x 367mm x 142mm (W x H x D)
Unit Material Polycarbonate (303 EP-22)
Operating Temperature -30°C to +50°C

Home Smart EV

• Built-in modem and GPRS signal antenna
• Built-in roaming Sim card connects directly to the strongest signal
• ev.energy Back Office management
• Smart charging control via the ev.energy smartphone app

-Data Sheet