Ideal for charging electric bikes, scooters, mobility vehicles, golf buggies at home or at work
Includes an IP65 outdoor 13amp socket
Includes built-in overload/fault current protection
Can be used as an EV charger or a 13amp outdoor maintenance socket
Safe and secure AC indoor and outdoor charging
Warm white base unit (other colours available upon request)
Green service pods (other colours available upon request)
Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
Glow wire rating tested to IEC60695-2-13
BSI certificated to BS EN 60335-1 for safe use in the home
Manufactured in compliance with BS7671 wiring regulations
Compliant with IET EV regulations
BS EN 60529 : IP65 category 1 certification (weatherproof)
Operating temperature 30C to + 50C
Easy to install / low maintenance
Designed to be permanently located indoors or outdoors
Able to charge almost all types of electric pushbikes, scooters, mopeds, and mobility vehicles
A 13amp socket protected by an IP65 rated access door (locking option available)
Doubles as a home outdoor maintenance socket
A built-in 16amp 30mA RCBO accessible via an IP65 rated access door (locking option available)
Full overload and fault current protection
230V AC / 50Hz
Cable entry points in top, bottom and back
Optional facility to lock plug in place whilst charging
Optional facility to lock RCBO access door
Optional built-in class 1 kWh mid approved meter (to monitor electricity usage)
Optional built-in time clock for charging on a cheap rate tariff or timed charging periods
All options available in the drop down tabs
A simple, low cost, Wall Mounted Mode 3 home charger ideal for charging Type 2 European cars such as BMW , Volvo, Mercedes and Renault from home. IEC62196 (Type 2)...
A simple, low cost, Wall Mounted home charger ideal for charging European Three phase cars. You will need a 3 phase supply to install this unit. A simple, cost effective...
WallPod EV: Commercial Charge is a simple, low-cost, easy to install mode 3 fast-charge EV charging station offering 16amp single or 3 phase (type 2) IEC62196 sockets complete with hatch...
The Entry Level EV Charger ideal for home builders wishing to offer low-cost EV Charging to satisfy planning applications and requirements Fully prepared for future upgrade to full mode 3...