A simple, affordable Charger ideal for charging all Type 1/Type 2 compatible vehicles at home.
A simple, cost effective Mode 3, 16amp or available 32amp specifically designed for charging electric vehicles at home
Easy to install and maintain
ZE Ready 1.2 Tested and Nissan Accredited
Believed to be the lowest priced full mode 3 fast charger in the UK
OLEV approved / Grant eligible
IP65 weatherproof rating believed to be the highest weather rated HomeCharger available
Built-in overload and DC sensitive fault current protection
Blue base unit
Green service pods
Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
Glow wire rating tested to IEC60695-2-13
BSI certificated to BS EN 60335-1 for safe use in the home
Manufactured in compliance with BS7671 wiring regulations
Compliant with IET EV regulations
BS EN 60529 : IP65 category 1 certification (weatherproof)
Operating temperature 30C to + 50C
Easy to install / low maintenance
Designed to be permanently located indoors or outdoors
Available in both 16amp (3.6kW) or 32amp (7.2kW)
Mode 3 IEC61851-1 compliant communication protocol
Built-in LED charging status indicator
A built-in 20amp or 40amp RCBO accessible via an IP65 rated access door
Full overload and DC sensitive fault current protection
230V AC / 50Hz
Multiple supply cable entry points
Optional wall mountable remote charging gun holster
Optional facility to lock RCBO access door
Optional addition of a 13amp outdoor maintenance socket (see Multi-mode)
Optional built-in Class 1 kWh mid approved meter ( to monitor electricity usage)
Optional built-in time clock for charging during cheap tariff (see economy boost)
Optional emergency charge facility (time clock option)
Optional security key switch control (to lock off the unit)
All options available on the drop down tabs
EVWP2010 16amp (3.6kW)
EVWP2020 32amp (7.2kW)
Platinum Package includes : 1 x 5meter 16amp (3.6kw) Type 2 to Type 2 charging cable + 1 x cable tidy carry case Specifications The Type 2 end of this...
Platinum Package includes : 1 x 5meter 32amp (7.2kw) Type 2 to Type 2 charging cable + 1 x cable tidy carry case Specifications The Type 2 end of this...
Specifications The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to...
Galvanised Steel Powder Coated Box Section Mounting Post Heavy-duty, galvanised steel powder coated box section WallPod mounting post Surface mount 1200mm above ground Discrete internally run cabling Four fixing points...
Galvanised Steel Angle Iron Mounting Post Low cost, heavy-duty post 1500mm x 3mm angle iron Hot-dip galvanised Installation 1000mm above ground, 500mm below ground (please choose mounting option from the...
3mm Powder coated steel WallPod mounting plate UV stabilised screen printed front 4 x Counter sunk WallPod to plate mounting holes 4 x Plate to Wall mounting holes Plate measurement...
Hatch Lock for IEC62196 Type 2 Socket Product Code EVHL0045
Material - Aluminium Finish - Screen printed
Material Aluminium Finish Screen printed