A simple, low cost, Wall Mounted Mode 3 home charger ideal for charging Type 2 European cars such as BMW , Volvo, Mercedes and Renault from home.
IEC62196 (Type 2) charging plug attached to a 5meter long tethered lead
Cable management as standard remote socket holster as an option
Easy to install and maintain
ZE Ready 1.2 Tested and Nissan Accredited
Believed to be the lowest priced full mode 3 fast charger in the UK
OLEV approved / Grant eligible
IP65 weatherproof (believed to be the highest weather rated HomeCharger available
Built-in overload and DC sensitive fault current protection
Warm white base unit (other colours available upon request)
Green service pods (other colours available upon request)
Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
Glow wire rating tested to IEC60695-2-13
BSI certificated to BS EN 60335-1 for safe use in the home
Manufactured in compliance with BS7671 wiring regulations
Compliant with IET EV regulations
BS EN 60529 : IP65 category 1 certification (weatherproof)
Operating temperature 30C to + 50C
Easy to install / low maintenance
Designed to be permanently located indoors or outdoors
Available in both 16amp (3.6kW) or 32amp (7.2kW)
Mode 3 IEC61851-1 compliant communication protocol
Built-in LED charging status indicator
A built-in 20amp or 40amp RCBO accessible via an IP65 rated access door
Full overload and DC sensitive fault current protection
230V AC / 50Hz
Multiple supply cable entry points
Optional wall mountable remote charging gun holster
Optional facility to lock RCBO access door
Optional addition of a 13amp outdoor maintenance socket (see Multi-mode)
Optional built-in Class 1 kWh mid approved meter (to monitor electricity usage)
Optional built-in time clock for charging during cheap tariff (see economy boost)
Optional emergency charge facility (time clock option)
Optional security key switch control ( to lock off the unit)
All options available in the drop down tabs
EVWP2080 - 16 Amp (3.6kW)
EVWP2140 - 32 Amp (7.2kW)
This Type 2 tethered cable can be used as a replacement on existing charge points in case you need to change the type or length. We can make these to...
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a...
Easily charge your Type 2 EV from a domestic 3 pin socket at 10 Amps (2.2kW). Just plug and charge! Specifications UK BS 1363 power plug Type 2 plug (IEC62196 /...
This adaptor / converter is a simple solution to convert an existing Type 1 connector on your cable or charge point to a Type 2 saving time and money. No...