WallPod : EV Multi-Mode Europe type 1 tethered lead 4.5m
EVMM0011
£340.99 £375.00
WallPod EV: Multi-Mode is a simple, low-cost, easy to install charging unit offering both, 16amp or available 32amp type 1 or type 2 Mode 3 for fast charging as well as an 16amp IP44 2pin shuko socket, suitable for both Mode 2 overnight charging and home maintenance use.
- A simple, cost effective Mode 3, 16amp or available 32amp charger specifically designed for charging electric vehicles at home
- available with J1772 (type 1) or IEC62196 (type 2) charging plugs attached to 4.5 meter tethered leads.
- Cable management system and remote socket holster comes as standard
- Includes 16amp IP44 2pin shuko socket, suitable for both Mode 2overnight charging and home maintenance use.
- wall mountable remote secure charging gun holster comes as standard
- Easy to install and maintain
- ZE Ready 1.2 Tested and Nissan Accredited
- IP65 weatherproof (believed to be the highest weather rated HomeCharger available
- CE Certified
- BSI Certificated
- Corrosion resistant
- UV stabilised
- Incredibly hard-wearing
- Built-in overload and DC sensitive fault current protection
Specifications
- Warm white base unit (other colours available upon request or on the WallPod Customizer)
- Green service pods (other colours available upon request or on the WallPod Customizer)
- Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
- Glow wire rating tested to IEC60695-2-13
- BSI certificated to BS EN 60335-1 for safe use in the home
- Manufactured in compliance with BS7671 wiring regulations
- Compliant with IET EV regulations
- Corrosion resistant
- UV stabilised
- BS EN 60529 : IP65 category 1 certification (weatherproof)
- Operating temperature 30C to + 50C
Performance
- Easy to install / low maintenance
- Designed to be permanently located indoors or outdoors
- Available in both 16amp (3.6kW) or 32amp (7.2kW)
- Mode 3 IEC61851-1 compliant communication protocol
- Built-in LED charging status indicator
- A built-in 20amp or 40amp RCBO accessible via an IP65 rated access door
- Full overload and DC sensitive fault current protection
- 230V AC / 50Hz
- Multiple supply cable entry points
Options
- Optional facility to lock RCBO access door
- Optional security key switch control ( to lock off the unit)
Related Items
WallPod : EV charging unit | Type 2 Socket | 3 Phase | 16/32 Amp(11/22kW) | 3 Pole Isolator | IP65 |
£369.00
WallPod EV: Commercial Charge is a simple, low-cost, easy to install mode 3 fast-charge EV charging station offering 16amp single or 3 phase (type 2) IEC62196 sockets complete with hatch...
WallPod : EV charging unit | Type 2 Tethered | 3 Phase | 16/32 Amp(11/22kW) | 4.5 Metre | IP65 |
£435.00
A simple, low cost, Wall Mounted home charger ideal for charging European Three phase cars. You will need a 3 phase supply to install this unit. A simple, cost effective...
WallPod : EV Charging Unit | 3 Pin Socket | 13 Amp | IP65 | UK |
£82.50
Description The Entry Level EV Charger ideal for home builders wishing to offer low-cost EV Charging to satisfy planning applications and requirements Fully prepared for future upgrade to full mode...
WallPod : EV Multi-Mode | Type 2 Tethered | 4.5 Meter | 16/32 Amp(3.6/7.2kW) | 3 Pin Socket | IP65 |
£360.00
WallPod EV: Multi-Mode is a simple, low-cost, easy to install charging unit offering both, 16amp or available 32amp type 1 or type 2 Mode 3 charging as well as an...