WallPod : EV Ready is an Entry level, Future proof, low-cost solution able to charge in mode 2 format (16amp 2pin IP44 shuko domestic socket) catering for almost every electric vehicle currently on the market.
This unit has also been designed and prepared to be quickly and easily upgraded to a full mode 3 charging as and when required, using a One Stop upgrade kit.
This 16amp IP44 2pin shuko domestic socket complete with 16amp overload and 30mA fault current protection can also double up as the home outdoor maintenance socket.
The Entry Level EV Charger ideal for home builders wishing to offer low-cost EV Charging to satisfy planning applications and requirements
Fully prepared for future upgrade to full mode 3 fast charging usinmg a One Stop upgrade kit
Can be used as an EV charger or a 16amp IP44 2pin shuko outdoor maintenance socket
Includes built-in overload/fault current protection
Includes an 16amp IP44 2pin shuko socket
Charges almost all current EVs at mode 2
Ideal for charging electric bikes, scooters, mobility vehicles, golf buggies if required
Safe and secure AC indoor and outdoor charging
Warm white base unit (other colours available upon request)
Green service pods (other colours available upon request)
Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
Glow wire rating tested to IEC60695-2-13
BSI certificated to BS EN 60335-1 for safe use in the home
Manufactured in compliance with BS7671 wiring regulations
Compliant with IET EV regulations
BS EN 60529 : IP65 category 1 certification (weatherproof)
Operating temperature -30C to + 50C
Easy to install / low maintenance
Designed to be permanently located indoors or outdoors
Able to charge almost all types of electric pushbikes, scooters, mopeds, mobility vehicles and Mode 2 capable Electric vehicles
A 16amp IP44 2pin shuko socket
Doubles as a home outdoor maintenance socket
A built-in 16amp 30mA RCBO accessible via an IP65 rated access door (locking option available)
Full overload and fault current protection
230V AC / 50Hz
Cable entry points top, bottom and back
Optional facility to lock plug in place whilst charging (lock for access door)
Optional facility to lock RCBO access door
Optional built-in class 1 kWh mid approved meter (to monitor electricity usage)
Optional built-in time clock for charging on a cheap rate tariff or timed periods
Option to be easily upgraded to Mode 3 fast charging using a One Stop upgrade kit
All options available in the drop down tabs
WallPod EV: Commercial Charge is a simple, low-cost, easy to install mode 3 fast-charge EV charging station offering 16amp single or 3 phase (type 2) IEC62196 sockets complete with hatch...
A simple, low cost, Wall Mounted home charger ideal for charging European Three phase cars. You will need a 3 phase supply to install this unit. A simple, cost effective...
The Entry Level EV Charger ideal for home builders wishing to offer low-cost EV Charging to satisfy planning applications and requirements Fully prepared for future upgrade to full mode 3...
WallPod EV: Multi-Mode is a simple, low-cost, easy to install charging unit offering both, 16amp or available 32amp type 1 or type 2 Mode 3 charging as well as an...