Type 1 tethered cable | 16/32amp | 3.6/7.2kW | J1772 | 5/10 Metre |
EVPL0140
£75.00
This tethered cable can be used as a replacement on existing charge points in case you need to change the type or length.
-
-Type 1 (J1772) plug
-5/10 Metre cable
-16/32 Amp - 3.6/7.2kW charge rate
Sometimes there are slight variations of up to 0.25 meters on tethered cables, due to the complexity of the wiring inside the unit.
Related Items
EV Public Charging Cable | Type 1 to Type 2 | 16/32 Amp | 3.6/7.2 kW | 5/10 Metre |
£94.95
Our charging cables are of the highest quality and standard. They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lead.
-
This cable comes with Type 2 and Type 1 connectors. The Type 2 must be connected to the charge point socket and Type 1 to your car.
This cable is suitable for the following vehicles:Chevrolet Spark
Chevrolet Volt
Citroen C-Zero
Ford Focus Electric
Kia Soul EV
Mitsubishi-I Miev
Mitsubishi Outlander PHEV
Nissan Leaf 2012 - 2017
Nissan NV200 SE Van
Peugeot Ion
Renault Fluence
Tata Indica Vista EV
Toyota Prius
Vauxhall Ampera
Data Sheet PDF
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.
WallPod : EV Charging Unit | Type 2 Socket | 16/32 Amp(3.6/7.2kW) | IP65 |
£289.00
A simple, affordable Home/Commercial charger ideal for charging all Type 1 and type 2 compatible vehicles. A simple, cost effective Mode 3, 16amp or available 32amp specifically designed for charging...
EV Home charging cable | Type 1 to 3 Pin plug | 10 Amp | 5/10 Metre | Mode 2 |
£158.33
Easily charge your EV from a domestic 3 pin socket at 10 Amps (2.2kW). Just plug and charge! This is suitable for all UK households.
-
-UK BS 1363 power plug
-Type 1 charging plug (J1772)
-5/10 Metre
-Current: 10A
-Voltage range: 220V ± 10%
-Maximum power: 2.2kW
-Auto charge recovery: Yes
-Over current protection: Yes
-16amp cable 3G2.5 + 2 x 0.75mm
-10,000 mating cycles
-Cable strain relief feature insulated terminal design
-Built-in LED charging status indicator
-IP66 weatherproof
-Operating temperature: -30° to +50°
-CE certified / TUV certified
Type 2 to Type 1 Cable Adaper/Converter | 16/32 Amp |
£99.50
This adapter / converter is a simple solution to convert an existing Type 2 connector on your cable or charge point to a Type 1 saving time and money. No...