Nissan Leaf 2012 - 2017
EV Public Charging Cable | Type 1 to Type 2 | 16/32 Amp | 3.6/7.2 kW | 5/10 Metre |
£94.95
Our charging cables are of the highest quality and standard. They allow you to charge your car from any public or home EV charging point and come in 5 or 10 meters to suit all your needs.
The Type 2 end of this cable must always be plugged directly into a charge point socket, this can not be used as an extension or an adaptor to a tethered lead.
-
This cable comes with Type 2 and Type 1 connectors. The Type 2 must be connected to the charge point socket and Type 1 to your car.
This cable is suitable for the following vehicles:Chevrolet Spark
Chevrolet Volt
Citroen C-Zero
Ford Focus Electric
Kia Soul EV
Mitsubishi-I Miev
Mitsubishi Outlander PHEV
Nissan Leaf 2012 - 2017
Nissan NV200 SE Van
Peugeot Ion
Renault Fluence
Renault Kangoo pre 2014
Tata Indica Vista EV
Toyota Prius
Vauxhall Ampera
Data Sheet PDF
Disclaimer: The look might slightly differ to the pictured cable. All function and specifications are the same.
WallPod : EV Charging Unit | Type 2 Socket | 16/32 Amp(3.6/7.2kW) | IP65 |
£289.00
A simple, affordable Home/Commercial charger ideal for charging all Type 1 and type 2 compatible vehicles. A simple, cost effective Mode 3, 16amp or available 32amp specifically designed for charging...
EV Home charging cable | Type 1 to 3 Pin plug | 10 Amp | 5/10 Metre | Mode 2 |
£158.28
Easily charge your EV from a domestic 3 pin socket at 10 Amps (2.2kW). Just plug and charge! This is suitable for all UK households.
-
-UK BS 1363 power plug
-Type 1 charging plug (J1772)
-5/10 Metre
-Current: 10A
-Voltage range: 220V ± 10%
-Maximum power: 2.2kW
-Auto charge recovery: Yes
-Over current protection: Yes
-16amp cable 3G2.5 + 2 x 0.75mm
-10,000 mating cycles
-Cable strain relief feature insulated terminal design
-Built-in LED charging status indicator
-IP66 weatherproof
-Operating temperature: -30° to +50°
-CE certified / TUV certified
Type 2 to Type 1 Cable Adapter/Converter | 16/32 Amp |
£99.50
This adapter / converter is a simple solution to convert an existing Type 2 connector on your cable or charge point to a Type 1 saving time and money. No...
NEWSTYLE - TYPE 1 TO TYPE 2 ADAPTER/CONVERTER
£69.99
Easily convert your existing Type 1 cable to a Type 2, giving you the flexibility to charge any Type 2 vehicles from your old equipment/system.
WallPod : EV Charging Unit | 3 Pin Socket | 13 Amp | IP65 | UK |
£82.50
Description The Entry Level EV Charger ideal for home builders wishing to offer low-cost EV Charging to satisfy planning applications and requirements Fully prepared for future upgrade to full mode...
WallPod : EV charging unit | Type 1 Tethered | 16/32 Amp(3.6/7.2kW) | 4.5 Metre | IP65 |
£315.00
A simple, affordable Mode 3 HomeCharger ideal for charging all Type 1 compatible vehicles at home such as Nissan + Kia. J1772 (type 1) charging plug attached to a 4.5meter...
Type 1 Extension Cable | 5 Meter | 16/32 Amp |
£120.00
Our extension cables easily allow you to extend the length of your Type 1 tethered units or normal cables, giving you the extra length you need for awkward driveway. They...
Type 1 tethered cable | 16/32amp | 3.6/7.2kW | J1772 | 5/10 Metre |
£75.00
This tethered cable can be used as a replacement on existing charge points in case you need to change the type or length.
-
-Type 1 (J1772) plug
-5/10 Metre cable
-16/32 Amp - 3.6/7.2kW charge rate
Sometimes there are slight variations of up to 0.25 meters on tethered cables, due to the complexity of the wiring inside the unit.
WallPod : EV Multi-Mode | Type 1 Tethered | 4.5 Meter | 16/32 Amp(3.6/7.2kW) | 3 Pin Socket | IP65 |
£360.00
WallPod EV: Multi-Mode is a simple, low-cost, easy to install charging unit offering both, 16amp or available 32amp type 1 or type 2 Mode 3 charging as well as an...
EV Charging Cable | Type 1 to 32A Commando | 7.2 kW | 5 Metre | Mode 2 |
£235.00
Easily charge your Type 1 EV from a 32 Amp commando socket. Just plug and charge! This is suitable for all UK households.
-
-32 Amp Commando power plug
-Type 1 charging plug (J1772)
-Power usage stats via LED screen
-Amp select feature to down rate on button press
-5 Metre
-Current: 32A
-Voltage range: 220V ± 10%
-Maximum power: 7.2kW
-Auto charge recovery: Yes
-Over current protection: Yes
-32amp cable 3G6 + 2 x 0.75mm
-10,000 mating cycles
-Cable strain relief feature insulated terminal design
-Built-in LED charging status indicator
-IP66 weatherproof
-Operating temperature: -30° to +50°
-CE certified / TUV certified